kapak-17 GAS DETECTION SYSTEM

GAS DETECTION SYSTEM

They may cause dangerous accumulations of gas, explosion and fire in the environment, as well as poisoning situations. From this point of view, it is vital that the detection of undesired gases and the reduction of alarms to the necessary panellars are important. These systems have a high level of importance in terms of prevention of loss of life and property and that the enterprises can continue in a healthy way.

Gas detection systems can be supplied by Evenos Fire Safety Systems Inc. from abroad and domestic, and the most appropriate solutions can be offered to customers according to customer needs. All systems and products are products with international certifications and designs are also made in line with international standards and manufacturer manuel.

Today, the most widely used and used gas detector types are;

  • Carbon monoxide detector
  • Natural gas detector
  • LPG detector

Hazardous gas detectors such as methane detector, propane detector, acetone detector, hydrogen sulfide detector, hexane detector, carbon dioxide detector, Nitrogen dioxide detector, Nitric oxide detector, Sulfur dioxide detector, Hydrogen Sulfur detector, Ammonia detector are frequently used in industrial fields. Detectors are specially manufactured and adjusted for each gas, because the limit burst values ​​of each gas vary.

The gas detection system generally consists of a detection panel, a gas detector, an audible warning device and an automatically operating gas cut-off ventilator. If desired, the control panel can also be monitored from the main fire detection and notification panel. Gas measurements can be made with infrared sensors from 0 to 100 LEL.

Gas detector use areas, parking lots, process sites, chemical factories, food factories, gas distribution stations, LPG stations, treatment plants and facilities, pharmaceutical facilities etc. . In short, the use of gas detectors in large industrial plants has become a necessity.

kapak-17 GAS DETECTION SYSTEM

Evenos Fire Safety Systems Corporation is also implementing maintenance, installation and commissioning of all gas detection systems. All maintenance processes are recorded in minutes and customer information is provided. System tests are also performed after installation and before the commissioning phase and system effectiveness is measured. After making sure that you can work, all the systems are turned on and delivered to the customer.