kapak-14 CO2 GAS EXTINGUISHING SYSTEMS

CO2 GAS EXTINGUISHING SYSTEMS

Automated carbon dioxide CO2 extinguishing systems, which are cheaper than clean gas extinguishing systems, can not be used in places where people are located.

All carbon dioxide CO2 extinguishing systems that are projected, assembled, designed, applied, commissioned and serviced by Sartona Fire Safety Systems are taken by the distributors in abroad and all systems have international certifications. (FM, UL, LPCB, VdS, GOST) System fillings are all made at the manufacturer’s premises and the systems are ready for import.

Low and high pressure systems can be provided as required, and cylinders can be supplied in various volume lengths in the direction of requirements and specifications. Generally, systems designed with cylinders under 60 bar pressure are activated by the signal from the detection systems and realize the extinguishing process.

All design and hydraulic calculations are made by the manufacturer’s approved hydraulic calculator programs. The hydraulic calculation program is German – VdS approved.

All designs are made according to American NFPA 12 Standard on Carbon Dioxide Extinguishing Systems standards and the values ​​indicated by these standards are used. It can perform the extinguishing operation with the principle based on the total flooding principle, and it also allows the design with the local flooding, thus the cost preservation and effectiveness issues can be maximized.

kapak-14 CO2 GAS EXTINGUISHING SYSTEMS

Total flooding is based on the principle that the entire room is filled with CO2 gas and the fire is extinguished at this rate. Local flooding is based on the principle that the CO2 gas is discharged only on the protected material or machine and the fire extinguishes directly there, when there is a fire associated with any machine, material etc. required to be protected.

System installations are made with steel drawn pipes and attention is paid to the minimum pipe wall thickness values.

System installations are made with steel drawn pipes and attention is paid to the minimum pipe wall thickness values.

It is very common to use in places where there are no continuous people, such as cable galleries, transformer rooms, generator rooms, wind turbines, flammable flammable liquid chambers.

Evenos Fire Security Systems Inc. All maintenance, repacking and service operations of CO2 extinguishing systems, which were commissioned by Evenos  A.Ş. experienced staff.